Professional Electric Nail Gel Polish Removal Machine Intelligent Touch Screen Operation Uv Led Gel Remover Steamer
1. Effective, One-time removing nail gel polish of five fingers, does not need to lift a finger Gel Removal Water
2. Environmental Health; steam will soften the nail so that remover the gel polish
(use with gel remover acetone)
Volt: AC100-250V 50Hz/ 60Hz
2.0 generation Touch-Screen design
Steam-off nail removal system,
fast and efficient,
say goodbye to nail removal wraps!
How to use steam off gel removal system
Step 1: Buff the top layer of the nails to break the seal, and open the top cover of the steamer off machine
Step 2: Pour 5 mL of Steam Off Gel Removal Liquidm
Step 3: Turn the unit on and wait about one minute for the removal solution to heat up.
The "H" indicates heat.
Step 4: When the “S” (steam) light turns green, remove the top lid. Place fingers in the silicone finger cap. Fingers should grip the plastic underside of the cap like a tennis ball.
Step 5: After the unit beeps twice, place all five fingers into the finger cap and steam for a minimum of five minutes.For best results, steam each hand for 10 minutes.The machine will beep once after 10 minutes have passed.
Step 6: Once the gel has steamed off, use an orange wood stick to gently remove any remaining color. Continue with regular gel manicure service.
Open the top cover, take off the fingers cap, then pour 5ml gel remover into the plastic bowl, twist the finger cap back onto the machine.
File the top coat gently.
Turn the steam off on and wait about one minute for the removal solution to heat up.
Place fingers into cap cover when the “S” (steam) light turns green. 5-10 minutes later, it begins steam off. After 5 minutes sound off short beeps and after 10 minutes a long beep.
Use a nail pusher or orange wood stick to gently remove any remaining color when the finished light turns on.
Gently apply hand lotion to continue regular gel manicure service.